ISO
linea
 

 ISO.WALL
WALLS		 ISO WALL

 ISO.FLOOR
FLOORS		 ISO FLOOR

 ISO.ALL
ROOFS
WALLS
FLOORS		 ISO ALL

 ISO.PLUS
ROOFS
WALLS
FLOOFS		 ISO PLUS

 ISO.ROOF
ROOFS		 ISO ROOF
 
DOWNLOAD
CERTIFICATIONS, TECHNICAL CARDS
AND CALCULUS SOFTWARE
linea
for download
freccia click here		 BROCHURE
 
ANIT - Associazione Nazionale per l'Isolamento Termico e Acustico
Isopack is member ANIT - Associazione Nazionale per l'Isolamento Termico e Acustico
freccia www.anit.it
ISO.ALL
linea
ISO ROOF ROOFS - WALLS - FLOOFS


ISO.ALL is a universal product composed of 9 layers of insulating materials in 18 mm.
It can be used for roofs, walls and floors ensuring a high thermal and acoustic insulation level.
Thanks to the aluminium’s reflective power, to its 3 air bubbles layers and 2 expanded polyurethane layers, ISO.ALL contributes significantly to the reduction of the energetic consumptions, producing great economic and environmental benefits.

 Iso Wall
INSTALLATION - FLOOR

  1. Apply ISO.ALL directly on the floor or on the whole surface of the levelling screed, bending the roll edges above the finished floor, avoiding the formation of air or lay it under the perimeter strip. Join ISO.ALL with the suitable adhesive tape.
  2. Add the screed on ISO.ALL.
  3. Cut the side of ISO.ALL that remains outside the floor to obtain a floating floor.
  4. Apply the baseboard.
    Note: Avoid the contact between the baseboard and the finished floor (ceramic, parquet, etc.).

 INSTALLATION - WALL

  1. Fix 2 cm-thick plankings on the wall at a distance of 1.20 m from each other.
  2. Place ISO.ALL fixing it on the plankings.
  3. Use the suitable aluminum adhesive tape to seal the ISO.ALL sheets’ joints.
  4. Build an internal double wall at a distance of about 2 cm from ISO.ALL sheets.
INSTALLATION - ROOF

  1. Fix 2 cm-thick plankings on the roof extrados at a distance of 60 cm from each other;
  2. Place ISO.ALL fixing it on the plankings;
  3. Use the suitable aluminum adhesive tape to seal the ISO.ALL sheets’ joints;
  4. Attach a double planking on ISO.ALL, then place the wooden flooring or OSB for the waterproofing through sheath and tiles.
COMPOSITION DESCRIPTION
1 st LAYER – EXTERNAL SKIN POLYETHYLENE/ALUMINIUM/POLYETHYLENE
2 sr LAYER – INTERMEDIATE PART AIRBUBBLE POLYETHYLENE
3 rd LAYER – INTERMEDIATE PART CLOSED CELL EXPANDED POLYETHYLENE
4 th LAYER – INTERMEDIATE PART AIRBUBBLE POLYETHYLENE
5 th LAYER – INTERMEDIATE PART CLOSED CELL EXPANDED POLYETHYLENE
6 th LAYER – INTERMEDIATE PART AIRBUBBLE POLYETHYLENE
7 th LAYER – EXTERNAL SKIN POLYETHYLENE/ALUMINIUM/POLYETHYLENE
CHARACTERISTICS VALUES
WEIGHT 750 g/mq
NOMINAL THICKNESS 18 mm
NOMINAL THICKNESS UNDER LOAD 16 mm