ISO
linea
 

 ISO.WALL
WALLS		 ISO WALL

 ISO.FLOOR
FLOORS		 ISO FLOOR

 ISO.ALL
ROOFS
WALLS
FLOORS		 ISO ALL

 ISO.PLUS
ROOFS
WALLS
FLOOFS		 ISO PLUS

 ISO.ROOF
ROOFS		 ISO ROOF
 
DOWNLOAD
CERTIFICATIONS, TECHNICAL CARDS
AND CALCULUS SOFTWARE
linea
for download
freccia click here		 BROCHURE
 
ANIT - Associazione Nazionale per l'Isolamento Termico e Acustico
Isopack is member ANIT - Associazione Nazionale per l'Isolamento Termico e Acustico
freccia www.anit.it
ISO.PLUS
linea
ISO ROOF ROOFS - WALLS - FLOOFS


ISO.PLUS derives from the necessity of using a sole product for different applications.
Used for roofs and walls, it is efficient both in summer and in winter, thanks to the 2 aluminium layers.

In summer, the upper layer reflects the heat coming from the outside, preventing it from flowing inside the building. In winter, the lower layer reflects the heat inside of the building, preventing it from flowing out of the building.

Applied on the floor instead, ISO.PLUS allows the reduction of the pounding noise thanks to the expanded polyurethane.

ISO.PLUS is composed of 7 layers completely bounded to each other so that a compact panel is formed, facilitating the laying and reducing the scraps.

 Iso Wall
INSTALLATION - FLOOR

  1. Apply ISO.PLUS directly on the floor or on the whole surface of the levelling screed, bending the roll edges above the finished floor, avoiding the formation of air or lay it under the perimeter strip. Join ISO.PLUS with the suitable adhesive tape.
  2. Add the screed on ISO.PLUS.
  3. Cut the side of ISO.PLUS that remains outside the floor to obtain a floating floor.
  4. Apply the baseboard.
    Note: Avoid the contact between the baseboard and the finished floor (ceramic, parquet, etc.).

 INSTALLATION - WALL

  1. Fix 2 cm-thick plankings on the wall at a distance of 1.20 m from each other.
  2. Place ISO.PLUS fixing it on the plankings.
  3. Use the suitable aluminum adhesive tape to seal the ISO.PLUS sheets’ joints.
  4. Build an internal double wall at a distance of about 2 cm from ISO.PLUS sheets.
INSTALLATION - ROOF

  1. Fix 2 cm-thick plankings on the roof extrados at a distance of 60 cm from each other;
  2. Place ISO.PLUS fixing it on the plankings;
  3. Use the suitable aluminum adhesive tape to seal the ISO.PLUS sheets’ joints;
  4. Attach a double planking on ISO.PLUS, then place the wooden flooring or OSB for the waterproofing through sheath and tiles.
COMPOSITION DESCRIPTION
1 st LAYER – EXTERNAL SKIN POLYETHYLENE/ALUMINIUM/POLYETHYLENE
2 sr LAYER – INTERMEDIATE PART AIRBUBBLE POLYETHYLENE
3 rd LAYER – INTERMEDIATE PART CLOSED CELL EXPANDED POLYETHYLENE
4 th LAYER – INTERMEDIATE PART AIRBUBBLE POLYETHYLENE
5 th LAYER – EXTERNAL SKIN POLYETHYLENE/ALUMINIUM/POLYETHYLENE
CHARACTERISTICS VALUES
WEIGHT 570 g/mq
NOMINAL THICKNESS 13 mm
NOMINAL THICKNESS UNDER LOAD 11 mm